Vendor: MINI
Type: AUSTRALIAN MINI
Price:
26.96
During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!
We have two types of felt on offer for you to buy:
M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý
N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.
Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.
Newton commercial part number- Felt Per Metre
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
67.25
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
NEWTON COMMERCIAL PART NUMBER- DYN11102
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
49.95
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
Newton commercial part number- DYN11101
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
135.00
The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý
Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý
These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý
Ìý
Âé¶¹¾«Æ· Part Number- DYN10455
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
20.09
This vinyl handbrake gaiter will suit all models and is fastened in place with Velcro which is stitched to the underside and will attach to the carpet set. A vinyl handbrake gaiter is included with all our early Mini moulded carpet kits up to 1973 as standard.Ìý
Âé¶¹¾«Æ· Part No – CK989
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
45.43 - 95.41
(18 variants)
This design of rear parcel shelf was used from the Mini's inception to 1996, where after this the rear seat belt mounts were located in this area so the later shelf does not fit across the full span of the car.Ìý
There are a variety of colours listed below - please note that all 1290 grain materials used in the MKIII Minis are listed under part number WA3027 (this includes Black, Navy and Autumn Leaf). If you can't see your colour requirement listed please get in touch with our sales team will be happy to help.Ìý
Âé¶¹¾«Æ· Part No – WA3021
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
5.05
These hog rings are used by our seat fitters to fit the rear seat covers to the frames on a number of seat refurbishments as per the original fitting. These hog rings are easiest to fit with a pair of hog ring pliers
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
2.19
These C-Clips are used on non reclining seats to secure the squab covers in place around the seat frame during fitting.Ìý
This pair of clips is enough for one seat
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
16.96
The majority of all Minis had painted "A" post pillars in all sorts of colours. We have developed a kit that fits exactly in this space with a fibreboard panel covered in black leathercloth material with double sided tape on the reverse side. This piece is adhered to the "A" post and a flap on the outer side is held in place by the draught excluder on the door post. These come as a pair.Ìý
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
24.49
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
26.49
This strong felt backed PVC material will help with noise reduction. Glued to the front bulkhead under the bonnet, you may need to cut some holes or slit the material to fit this around various mechanicals, depending on the exact specification of your Mini.Ìý
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
42.89
These rear pocket liners are suitable for all Saloon models up to 1973 with the front mounted ash tray in the rear pocket.. The board is creased to help you fold it into the pocket and the cutout for the ashtray is pressed into the fibreboard backing.
Some original colours may no longer be available as these interiors were made as a complete knock down model in production in Australia. We offer a range of colours used in the UK production.Ìý
Âé¶¹¾«Æ· Part No – WA3023
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
13.87
An ingenious solution to the modern bracket that stops the doors from opening too far, these straps are made from vinyl with a strong nylon fabric sewn inside. They attach to the front of the door and the rear edge of the A panel, about level with the top of the storage bins. The metal plates used to fix these in place, must be retained along with the bolts. Simply punch 4 holes in this strap and then insert the screw bolts through your plates to fit.
Some original colours may no longer be available as these interiors were made as a complete knock down model in production in Australia. We offer a range of colours used in the UK production.Ìý
Âé¶¹¾«Æ· Part No – DC3005
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
38.78
These panels are designed to fit models fitted with the central three instrument speedo binnacle fitted as standard. They can be quite difficult to fit around the binnacle as they are curved into position and held in place by the material flap behind the draught excluder and the plastic binnacle itself. These come as a pair.Ìý
Some original colours may no longer be available as these interiors were made as a complete knock down model in production in Australia. We offer a range of colours used in the UK production.Ìý
Âé¶¹¾«Æ· Part No – DT3021
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
24.83
Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý
Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
40.37
These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.
Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
59.64
These small hand held pump glue guns are ideal for all kinds of trimming or interior repairs, and is an essential piece of equipment for many jobs such as headlining fitting. In fact for any tasks requiring the application of contact adhesive neatly and quickly, there is nothing to beat them!Ìý
Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means they are lightweight, comfortable to use and pretty much indestructible and our team use these on a daily basis throughout our factory. Regular flushing with solvent will keep the pump in good order, and it isÌýbest to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.
Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and DIY centres.ÌýThis does not include the glue.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
30.28
These covers are sewn to fit over the rear wheel arch by the rear seats. We suggest that a thin foam or thin piece of felt is glued to the wheel arch first and then the cover is adhered over the top to soften the profile.
Some original colours may no longer be available as these interiors were made as a complete knock down model in production in Australia. We offer a range of colours used in the UK production.Ìý
Âé¶¹¾«Æ· Part No – WAC3024
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
51.31
The underfelt kit comprises the two main floor pan areas, a pair of felts to go under the front wheel arch carpets and a front bulkhead piece which should all be glued in place. It is cut to an outside shape but can be trimmed as necessary depending on the floor pan and tunnel arrangement of your car. The felt itself is dense enough to reduce a lot of drumming but flexible enough to be glued around the contours of the floor pan before the carpets are fitted on top.Ìý
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
10.59
These clips are needed to secure the seat cover skirts and fitting flaps to the seat frame. Used across the BMC / BLMC range, these will fit most models manufactured.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
30.14
Our underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and protection from moisture. Felt will need to be glued into the roof cavity as fitted from factory.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
8.02
These foams are best glued to the wheel arch panel first and then the wheel arch cover is glued over the top. These foams soften the profile of the bare metal underneath the wheel arch cover.
This kit covers both wheel arches.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
77.31
This original design of the seat straps was fitted to the very early seat post leg seat frames of the early Morris and Austin Minis and was also used in the MKI Australian Minis. We make these straps in house with British manufacturing at its best.
This kit is for theÌýsquabs only forÌýboth front seats.
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
548.84
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this particular design was used after June 1969.ÌýThe rears have the same flute design as the front seats, with 4 banksÌýof 2 narrow flutes with a plain middle and sides. The base faces roll over the front of the seat, giving a similar appearance to the UK specification Mini MKII & MKIII seat covers. Colours may also be different as the material was often Australian sourced and we may not be able to match all original colours.Ìý
This is a new addition to our Australian Mini trim with the help of Mini Sport Australia. Because these seats were made in Australia we have a limited amount of information regarding the use of interior trim. Pictures and any information you have will help our sales team to try and identify which style was originally fitted in your car.Ìý
Ìý
Âé¶¹¾«Æ· Part No – SC3067
Vendor: MINI
Type: AUSTRALIAN MINI
Price:
0.00 - 469.63
(6 variants)
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this style was used for all Australian MKI Minis made after June 1969.ÌýThese seats feature a sewn fluted face with two sets of narrow flutes with a wider plain centre. Colours may also be different as the material was often Australian sourced and we may not be able to match all original colours.Ìý
We have come across two different frame shapes of the the Australian MKI Mini seat frame for these seats - one with a rounded seat squab and other with a more angular square seat squab. We have patterns for both styles, however we believe the roundback to be the original Australian production.ÌýIf you are unsure which your particular model is please get in touch with our sales team who will be able to identify from supplied pictures.
The easiest way to see which style you have is from looking at the back of the squab (the piece you put your back on). For a round back seats the side will taper together at the top whereas the sides of the square back seat are parallel to each other. If you order this item seat covers will be supplied in the squareback style.Ìý
This is a new addition to our Australian Mini trim with the help of Mini Sport Australia. Because these seats were made in Australia we have a limited amount of information regarding the use of interior trim. Pictures and any information you have will help our sales team to try and identify which style was originally fitted in your car.Ìý
Âé¶¹¾«Æ· Part No – SC3067