Vendor: PEUGEOT 205
Type: CTI
Price: 26.96

During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!

We have two types of felt on offer for you to buy:

M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.听

N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.

Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.

Newton commercial part number- Felt Per Metre

Vendor: PEUGEOT 205
Type: CTI
Price: 67.25

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听

听

NEWTON COMMERCIAL PART NUMBER- DYN11102

Vendor: PEUGEOT 205
Type: CTI
Price: 49.95

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听

听

Newton commercial part number- DYN11101

Vendor: PEUGEOT 205
Type: CTI
Price: 135.00

The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.听

Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.听

These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.听

听

麻豆精品 Part Number- DYN10455

Vendor: PEUGEOT 205
Type: CTI
Price: 27.83

Original design vinyl gear lever gaiter for your Peugeot. This gaiter is designed to be clipped onto your original plastic holder which then slips into the centre console.

Available in a variety of colours to suit our Peugeot moulded carpets (suitable for both GTi & CTi models)

麻豆精品 - Part no BHH650

Vendor: PEUGEOT 205
Type: CTI
Price: 59.64

These small hand held pump glue guns are ideal for all kinds of trimming or interior repairs, and is an essential piece of equipment for many jobs such as headlining fitting. In fact for any tasks requiring the application of contact adhesive neatly and quickly, there is nothing to beat them!听

Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means they are lightweight, comfortable to use and pretty much indestructible and our team use these on a daily basis throughout our factory. Regular flushing with solvent will keep the pump in good order, and it is听best to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.

Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and DIY centres. This does not include the glue.

Vendor: PEUGEOT 205
Type: CTI
Price: 53.00

ThIS 4 piece overmat set is a great idea for anyone who wants to protect either their original Peugeot 205 CTI carpet or their brand new 麻豆精品 moulded crumb carpets. Universal for both the RHD & LHD models, the mats are made from a heavy duty dense backed carpet and bound in the matching leathercloth. Please note the mats are only available in Black or Grey.听

麻豆精品 Part No - CK638

Vendor: PEUGEOT 205
Type: CTI
Price: 25.80

Suitable for both the Peugeot 205 GTi and the CTi models this boot mat underfelt can be combined with our Hardura boot mat to provide additional sound deadening to the boot area.

Vendor: PEUGEOT 205
Type: CTI
Price: 53.92

Suitable for both the Peugeot 205 GTi and the CTi models this boot mat is the perfect way to tidy up any tired boot area. Made from Hardura material, this PVC material with a heavy duty felt backing is wipe clean and provides the necessary additional sound deadening to the boot area.

Vendor: PEUGEOT 205
Type: CTI
Price: 25.10

These black wheel arch carpets are used to replace the originals in the Peugeot 205 CTi and can be glued into place once the originals have been removed. Made from a black stretch carpet as the original, these are cut to size and supplied as a pair.

Vendor: PEUGEOT 205
Type: CTI
Price: 80.91

This product is an essential accessory not only for our own moulded carpet sets but also for anyone seeking to add extra sound insulation under any Peugeot 205 CTi carpet.

Made from 9mm felt, the underfelt is dense enough to reduce a lot of drumming but flexible enough to be glued around the contours of the floor pan before the moulded carpets are fitted on top.听

(Please note that the underfelt kit is part of the CTi carpet set and does not need to be purchased separately)

Vendor: PEUGEOT 205
Type: CTI
Price: 263.62 - 276.11 (4 variants)

Produced as a one piece moulded set as per the original, this kit includes the underfelt, the carpet for the sides of the centre console (for both the Phase 1 & Phase 1.5 as pictured below) and easy to follow fitting instructions all suitable for the Peugeot 205 CTi. All holes for the seat mounts are indicated on the reverse of the carpet to give you the best possible fit.

While the carpet material is not exactly the same as the original carpet, this hard wearing automotive carpet will brighten up any tired interior and is available in a range of colours. Samples of the carpet are available from our sales team prior to purchase if required. Please do not hesitate to get in touch if required.听

麻豆精品 Part No - CK631

听

Vendor: PEUGEOT 205
Type: CTI
Price: 262.25 - 276.11 (4 variants)

Produced as a one piece moulded set as per the original, this kit includes the underfelt, the carpet for the sides of the centre console and easy to follow fitting instructions all suitable for the Peugeot 205 CTi. All holes for the seat mounts are indicated on the reverse of the carpet to give you the best possible fit.

While the carpet material is not exactly the same as the original carpet, this hard wearing automotive carpet will brighten up any tired interior and is available in a range of colours. Samples of the carpet are available from our sales team prior to purchase if required. Please do not hesitate to get in touch if required.听

麻豆精品 Part No - CK630

听

Vendor: PEUGEOT 205
Type: CTI
Price: 25.10

We have found that the rear parcel shelf unit is in good condition on the Peugeot 205 GTi and CTis that we have come across and they just need to carpet replacing. Once the original carpet covering is removed, this replacement can be glued in place straight on top of the moulded fibreglass unit as is made from a flexible stretch black carpet we use specifically for our range of parcel shelves.听

Vendor: PEUGEOT 205
Type: CTI
Price: 18.84

Peugeot 205 GTi door panels were all fitted with a carpet kick panel along the bottom of the door that may now be dirty, damaged or faded. These replacement carpet pieces are perfect to spruce this up and are made in the matching carpet to our new moulded carpets.

These do not come as standard with our moulded carpet set and will need to be purchased separately.听

麻豆精品 Part No - CK629

Vendor: PEUGEOT 205
Type: CTI
Price: 31.80

These 2 piece overmats are a great idea for anyone who wants to protect either their original Peugeot 205 CTI carpet or their brand new 麻豆精品 moulded crumb carpets. Universal for both the RHD & LHD models, the mats are made from a heavy duty dense backed carpet and bound in the matching leathercloth. Please note the mats are only available in Black or Grey.听

麻豆精品 Part No - CK634

Vendor: PEUGEOT 205
Type: CTI
Price: 24.83

Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.听

Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.听

Vendor: PEUGEOT 205
Type: CTI
Price: 40.75

These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: PEUGEOT 205
Type: CTI
Price: 7.78

This self adhesive Bitumen pad will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

These pads measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: PEUGEOT 205
Type: CTI
Price: 9.02

This is the top of the range, heavy duty spray glue that we use in our factory to make all our trim products on a day to day basis. We recommend you use spray glue to fit your Newton products to your car (where applicable). You will mainly use this product to fit underfelt and carpets to your floor pan. You can also use it for fitting your foams to the frames and then the seat covers to the foams. This adhesive can also be used for day to day jobs around the house. Its a full 500ml can, wrapped in bubble wrap for safe transport. Please note that we are unable to send this product outside the UK.