Vendor: FORD
Type: CAPRI
Price: 420.80

This premium quality Ford Capri carpet set has been developed straight from the floor of a Capri to allow for a direct fit around the contours of your car.

This moulded two piece carpet set is suitable for all MKI-III Capri vehicles with the plastic armrest between the two front seats. The carpet is in two pieces as you can see from the picture and this join is covered by the moulded plastic piece for the gear lever & handbrake gaiter (this is not included within the kit & you will need to retain the original).

You will also find an underfelt set within this kit that has been shaped ready to go straight into the floor of your Capri and we recommend using this to provide the best fit of the main carpet set.

This kit will not fit models without the armrest. This carpet set is only available in premium automotive black carpet.

Â鶹¾«Æ· part number- CK6981

Vendor: FORD
Type: CAPRI
Price: 420.80

This premium quality Ford Capri carpet set has been developed straight from the floor of a Capri to allow for a direct fit around the contours of your car.

This moulded one piece carpet set is suitable for all MKI-III Capri vehicles without the plastic armrest between the two front seats. This was predominantly on all early MKI vehicles but we have come across this for cars produced throughout this period as a factory option so please make sure you are ordering the correct kit.Ìý

Within this carpet set you will also find an underfelt which has been cut to shape and we recommend applying this directly to the floor of your Capri to allow for the best fit of the carpet set.

This Capri carpet is only available in a premium automotive black carpet.

Newton commercial part number- CK697

Vendor: FORD
Type: CAPRI
Price: 26.96

During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!

We have two types of felt on offer for you to buy:

M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý

N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.

Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.

Newton commercial part number- Felt Per Metre

Vendor: FORD
Type: CAPRI
Price: 67.25

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

NEWTON COMMERCIAL PART NUMBER- DYN11102

Vendor: FORD
Type: CAPRI
Price: 49.95

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

Newton commercial part number- DYN11101

Vendor: FORD
Type: CAPRI
Price: 135.00

The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý

Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý

These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý

Ìý

Â鶹¾«Æ· Part Number- DYN10455

Vendor: FORD
Type: CAPRI
Price: 39.42

These replacement carpets fit into the moulded fibreglass parcel shelf and are cut to size to fit. The parcel tray is only used on the MKII & MKIII models that have the full hatchback boot whereas the MKI had just a small boot lid under the rear window. They will need gluing to secure in place. These are made in our OEM style Ribbed carpet and are available in black or grey.Ìý

Â鶹¾«Æ· Part No -Ìý CK711

Vendor: FORD
Type: CAPRI
Price: 24.83

Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý

Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý

Vendor: FORD
Type: CAPRI
Price: 420.80

This moulded one piece carpet set is suitable for all MKI-III Capri vehicles without the plastic armrest between the two front seats. This was predominantly on all early MKI vehicles but we have come across this for cars produced throughout this period as a factory option so please make sure you are ordering the correct kit. The sound deadening underfelt kit is included with the carpet which allows for the best finish and fit. Full easy to follow fitting instructions are included. Please note that on the one piece loop pile carpet only, the sill and footwell carpets have been left longer and will need to be trimmed upon fitting. Due to the nature of the material these are left oversize to combat any shrinkage - full fitting instructions are included with details on how to do this.ÌýÌý

These carpets are made exclusively in the UK in our Suffolk factory from a loop pile carpet which we also use on our moulded Ford Escort carpets. This is close to the original style of carpet used within original Capri production. Please note this is only available in Black, Grey or Brown. Samples are available upon request.Ìý

Â鶹¾«Æ· Part No -Ìý CK696

Vendor: FORD
Type: CAPRI
Price: 344.93 - 362.18 (6 variants)

This moulded one piece carpet set is suitable for all MKI-III Capri vehicles without the plastic armrest between the two front seats. This was predominantly on all early MKI vehicles but we have come across this for cars produced throughout this period as a factory option so please make sure you are ordering the correct kit. The sound deadening underfelt kit is included with the carpet which allows for the best finish and fit. Full easy to follow fitting instructions are included.Ìý

These carpets are made exclusively in the UK in our Suffolk factory from our modern needlepunch nylon carpet which is available in a range of colours - samples are available on request.Ìý

Â鶹¾«Æ· Part No -Ìý CK694

Vendor: FORD
Type: CAPRI
Price: 7.78

This self adhesive Bitumen pad will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

These pads measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: FORD
Type: CAPRI
Price: 40.75

These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: FORD
Type: CAPRI
Price: 59.64

These small hand-held pump glue guns are ideal for all kinds of trimming or interior repairs, and an essential for many jobs such as headlining fitting. In fact for any tasks requiring the application of medium to large quantities of contact adhesive, neatly and quickly, there is nothing to beat them!Ìý

Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means that they are lightweight, comfortable to use and pretty much indestructible. Regular flushing with solvent will keep the pump in good order, and it is desirable to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.

Note:Ìý GLUE SPECIFICATION

Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and home DIY centres

Â鶹¾«Æ· Part No -Ìý CK999 GLUE POT

Vendor: FORD
Type: CAPRI
Price: 9.02

This is the top of the range, heavy duty spray glue that we use in our factory to make all our trim products on a day to day basis. We recommend you use spray glue to fit your Newton products to your car (where applicable). You will mainly use this product to fit underfelt and carpets to your floor pan. You can also use it for fitting your foams to the frames and then the seat covers to the foams. This adhesive can also be used for day to day jobs around the house. Its a full 500ml can, wrapped in bubble wrap for safe transport. Please note that we are unable to send this product outside the UK.

Â鶹¾«Æ· Part No -Ìý CK990

Vendor: FORD
Type: CAPRI
Price: 65.18

Made from the original style loop pile carpet these pieces replace the carpet on the back of the rear seat and will tidy up any boot space. This matches theÌýmoulded carpet for the main body of the car and is available in black or grey only. The metal seat pan will need to be removed for the flapped carpet to be glued around the edges. The rear seat foams and covers are then fitted to this metal pan once the carpet has been glued into place.Ìý

Â鶹¾«Æ· Part No -ÌýÌýCK715

Vendor: FORD
Type: CAPRI
Price: 65.18

Made from the original style tufted carpet these pieces replace the carpet on the back of the rear seat and will tidy up any boot space. This matches theÌýtuftedÌýmoulded carpet for the main body of the car and is available in grey only. The metal seat pan will need to be removed for the flapped carpet to be glued around the edges. The rear seat foams and covers are then fitted to this metal pan once the carpet has been glued into place.Ìý

Â鶹¾«Æ· Part No -Ìý CK714

Vendor: FORD
Type: CAPRI
Price: 52.44 - 55.05 (7 variants)

Made from our nylon needlepunch Carvel carpet these pieces replace the carpet on the back of the rear seat and will tidy up any boot space. This matches the nylon moulded carpet for the main body of the car and is available in a range of colours. The metal seat pan will need to be removed for the flapped carpet to be glued around the edges. The rear seat foams and covers are then fitted to this metal pan once the carpet has been glued into place.Ìý

Â鶹¾«Æ· Part No -Ìý CK713

Vendor: FORD
Type: CAPRI
Price: 82.77

Made from our tuftedÌýcarpet this rear load area carpet will tidy up any boot space and matches theÌýtufted original style moulded carpet for the main body of the car. This is available in Grey only.

These come with the fittings to secure in place and the sewn flap that fits under the rear seat as pictured below.

Â鶹¾«Æ· Part No -Ìý CK717

Vendor: FORD
Type: CAPRI
Price: 64.85

Made from our nylon needlepunch Carvel carpet this rear load area carpet will tidy up any boot space and matches the nylon moulded carpet for the main body of the car and are available in a range of colours. These come with the fittings to secure in place and the sewn flap that fits under the rear seat as pictured below.

Â鶹¾«Æ· Part No -Ìý CK716Ìý

Vendor: FORD
Type: CAPRI
Price: 50.69

These replacement carpets fit into the moulded fibreglass parcel shelf and are cut to size to fit. The parcel tray is only used on the MKII & MKIII models that have the full hatchback boot whereas the MKI had just a small boot lid under the rear window. They will need gluing to secure in place. This is available in our Grey tufted carpet which is close to the original style of carpet.

Â鶹¾«Æ· Part No -Ìý CK712

Vendor: FORD
Type: CAPRI
Price: 31.80

These 2 piece overmats are a great accessory for anyone who wants to protect either their original carpet or their brand new Â鶹¾«Æ· moulded carpets. Universal for both the RHD & LHD models and both the one piece and two piece carpet sets, the mats are made from a heavy duty dense crumb backed carpet and bound in the matching leathercloth. Please note the mats are only available in Black or Grey.Ìý

Â鶹¾«Æ· Part No -Ìý CK710

Vendor: FORD
Type: CAPRI
Price: 441.83

This moulded two piece carpet set is suitable for all MKI-III Capri vehicles with the plastic armrest between the two front seats. The carpet is in two pieces as you can see from the picture and this join is covered by the moulded plastic piece for the gear lever & handbrake gaiter (this is not included within the kit & you will need to retain the original). Please make sure you are ordering the correct kit as this kit will not fit models without the armrest. The sound deadening underfelt kit is included with the carpet which allows for the best finish and fit. Full easy to follow fitting instructions are included.Ìý

These carpets are made exclusively in the UK in our Suffolk factory from a loop pile carpet which we also use on our moulded Ford Escort carpets. This is close to the original style of carpet used within original Capri production. Please note this is only available in Black, Grey or Brown. Samples are available upon request.Ìý

ÌýÂ鶹¾«Æ· Part No -Ìý CK702

Vendor: FORD
Type: CAPRI
Price: 60.85

This product is an essential accessory not only for our own moulded carpet sets but also for anyone seeking to add extra sound insulation under any Ford CapriÌýcarpet.

Made from 9mm felt, the underfelt is dense enough to reduce a lot of drumming but flexible enough to be glued around the contours of the floor pan before the moulded carpets are fitted on top. Please note this underfelt is available for the two piece carpet only as the cut outs on the tunnel sections are different.

(Please note that the underfelt kit is part of the carpet set and does not need to be purchased separately)

Vendor: FORD
Type: CAPRI
Price: 60.85

This product is an essential accessory not only for our own moulded carpet sets but also for anyone seeking to add extra sound insulation under any Ford CapriÌýcarpet.

Made from 9mm felt, the underfelt is dense enough to reduce a lot of drumming but flexible enough to be glued around the contours of the floor pan before the moulded carpets are fitted on top. Please note this underfelt is available for the one piece carpet only as the cut outs on the tunnel sections are different.

(Please note that the underfelt kit is part of the carpet set and does not need to be purchased separately)

Vendor: FORD
Type: CAPRI
Price: 420.80

This moulded two piece carpet set is suitable for all MKI-III Capri vehicles with the plastic armrest between the two front seats. The carpet is in two pieces as you can see from the picture and this join is covered by the moulded plastic piece for the gear lever & handbrake gaiter (this is not included within the kit & you will need to retain the original). Please make sure you are ordering the correct kit as this kit will not fit models without the armrest. The sound deadening underfelt kit is included with the carpet which allows for the best finish and fit. Full easy to follow fitting instructions are included.Ìý

These carpets are made exclusively in the UK in our Suffolk factory from a Grey tufted carpet which is close to the original style carpet. Please note this is only available in Grey. Samples are available upon request.Ìý

Ìý