Vendor: TRIUMPH
Type: GT6
Price: 26.96

During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!

We have two types of felt on offer for you to buy:

M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý

N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.

Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.

Newton commercial part number- Felt Per Metre

Vendor: TRIUMPH
Type: GT6
Price: 86.94

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

NEWTON COMMERCIAL PART NUMBER- DYN11102

Vendor: TRIUMPH
Type: GT6
Price: 60.48

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

Newton commercial part number- DYN11101

Vendor: TRIUMPH
Type: GT6
Price: 167.58

The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý

Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý

These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý

Ìý

Â鶹¾«Æ· Part Number- DYN10455

Vendor: TRIUMPH
Type: GT6
Price: 59.64

These small hand held pump glue guns are ideal for all kinds of trimming or interior repairs, and is an essential piece of equipment for many jobs such as headlining fitting. In fact for any tasks requiring the application of contact adhesive neatly and quickly, there is nothing to beat them!Ìý

Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means they are lightweight, comfortable to use and pretty much indestructible and our team use these on a daily basis throughout our factory. Regular flushing with solvent will keep the pump in good order, and it isÌýbest to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.

Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and DIY centres.ÌýThis does not include the glue.

Vendor: TRIUMPH
Type: GT6
Price: 9.02

This is the top of the range, heavy duty spray glue that we use in our factory to make all our trim products on a day to day basis. We recommend you use spray glue to fit your Newton products to your car (where applicable). You will mainly use this product to fit underfelt and carpets to your floor pan. You can also use it for fitting your foams to the frames and then the seat covers to the foams. This adhesive can also be used for day to day jobs around the house. Its a full 500ml can, wrapped in bubble wrap for safe transport. Please note that we are unable to send this product outside the UK.

Vendor: TRIUMPH
Type: GT6
Price: 7.69

This self adhesive Bitumen pad will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

These pads measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: TRIUMPH
Type: GT6
Price: 40.37

These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: TRIUMPH
Type: GT6
Price: 24.83

Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý

Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý

Vendor: TRIUMPH
Type: GT6
Price: 75.21

An option from factory was an occasional rear seat that could be removed. A lot of these seats have been discarded as they left very little room for anyone seated in the rear of the vehicle but these have become a more popular option.ÌýThese replacement foams are used to fit the GT6 occasional rear seat and come cut to size.

Vendor: TRIUMPH
Type: GT6
Price: 635.92

An option from factory was an occasional rear seat that could be removed. A lot of these seats have been discarded as they left very little room for anyone seated in the rear of the vehicle but these have become a more popular option.

The kit includes the cover for the base and the squab and the carpet to cover the back of the squab. The fluted section of the seat covers are made from a cloth faceÌýas used on on the later MKIII models - please note this material is only available in the colours listed and only black is an original colour used on the GT6 production.ÌýWe produce the carpet in the closest matching colour to the vinyl used but if you are using a different coloured carpet then please let us know and we can produce this accordingly. The kit does not include the metal fixings and brackets for affixing the seat in the rear luggage area.ÌýÌý

Vendor: TRIUMPH
Type: GT6
Price: 635.92

An option from factory was an occasional rear seat that could be removed. A lot of these seats have been discarded as they left very little room for anyone seated in the rear of the vehicle but these have become a more popular option.

The kit includes the cover for the base and the squab and the carpet to cover the back of the squab. The fluted section of the seat covers are made from the perforated basketweave material as used on on the later MKII models - please note this material is only available in the colours listed and only black is an original colour used on the GT6 production. We produce the carpet in the closest matching colour to the vinyl used but if you are using a different coloured carpet then please let us know and we can produce this accordingly. The kit does not include the metal fixings and brackets for affixing the seat in the rear luggage area.ÌýÌý

Vendor: TRIUMPH
Type: GT6
Price: 635.92

An option from factory was an occasional rear seat that could be removed. A lot of these seats have been discarded as they left very little room for anyone seated in the rear of the vehicle but these have become a more popular option.

The kit includes the cover for the base and the squab and the carpet to cover the back of the squab. We produce the carpet in the closest matching colour to the vinyl used but if you are using a different coloured carpet then please let us know and we can produce this accordingly. The kit does not include the metal fixings and brackets for affixing the seat in the rear luggage area.ÌýÌý

Vendor: TRIUMPH
Type: GT6
Price: 263.17

We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaintÌýthe seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.

Please note this cost is for the GT6 MKÌýIII

Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange. This cost is per seat.

Vendor: TRIUMPH
Type: GT6
Price: 347.45

We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaint the seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.

Please note this cost is for the GT6 MK I & II US Lowback seats only.

Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange. This cost is per seat.

Vendor: TRIUMPH
Type: GT6
Price: 394.81

We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaintÌýthe seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.

Please note this cost is for the GT6 MK I & II US Highback seats only.

Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange. This cost is per seat.

Vendor: TRIUMPH
Type: GT6
Price: 138.43

This pair of very long rear quarter panels are finished to the exact design of the factory originals with all necessary holes punched out and piping around the correct edges. Two pieces of material are supplied to cover the B posts. Please note that these panels have a cut out on one side for the petrol filler.

Â鶹¾«Æ· Part No - WA1636

Vendor: TRIUMPH
Type: GT6
Price: 138.43

This pair of very long rear quarter panels are finished to the exact design of the factory originals with all necessary holes punched out and piping around the correct edges. Two pieces of material are supplied to cover the B posts."

Â鶹¾«Æ· Part No - WA1562

Vendor: TRIUMPH
Type: GT6
Price: 88.48

These panels are basically splash panels to protect the engine from water splashing from the front wheels. They are made from Bitumen board which is waterproof creased to create their shape. They have special metal brackets to hold the correct shape when fitted.

Â鶹¾«Æ· Part No - VP1643

Vendor: TRIUMPH
Type: GT6
Price: 88.48

These panels are basically splash panels to protect the engine from water splashing from the front wheels. They are made from Bitumen board which is waterproof creased to create their shape. They have special metal brackets to hold the correct shape when fitted.

Â鶹¾«Æ· Part No - VP1642

Vendor: TRIUMPH
Type: GT6
Price: 478.47

We highly recommend looking at the fitting instructions before starting to fit these foams.

This foam set is for both seats. Originally the side bolsters were made from a moulded chip foam which in the 1960's was new technology. However over the years this technology was not that good in that the glue holding the chips together came apart and consequently these moulded items disintegrated and you will probably find foam chips under your seat if they haven't been changed in the meantime. The kit we have developed from more modern foams needs to be sculptured around the frame. The centre sections are quite straight forward but we would suggest you contact a professional trimmer to help you fit these and the seat covers. We will be pleased to offer advice as well.

Vendor: TRIUMPH
Type: GT6
Price: 575.77

This particular seat design was only produced for a very short time for USA models. It is odd because the centre fluted section of the seat cover is embossed with the Diamond pattern that was used on the TR6 range of the same period. Later models in this year had a more conventional perforated pattern. Be sure to check the foams and straps underneath if they are original because it is quite likely that they have disintegrated with age.

Â鶹¾«Æ· Part No - SC1532

Vendor: TRIUMPH
Type: GT6
Price: 128.00

The original headlining material used by the Factory was called "Longhorn" design because of the very heavy graining in the material. The headlining has the necessary hoops sewn to accept the stays.

Ìý

Â鶹¾«Æ· Part No - HL1637 / HL1638

Vendor: TRIUMPH
Type: GT6
Price: 559.01

A new design of seat was introduced for the 1970 model year. It was based on the UK seats but with the addition of a fixed high back style headrest. The seat reclines. The new design incorporated vertical flutes in the seat centres. This particular design has plain flutes. This is a pair of seat covers.

Â鶹¾«Æ· Part No - SC1526

Vendor: TRIUMPH
Type: GT6
Price: 46.40

We have retooled the knee pad metal and the foam padding for this product. These items fit in front of the central tunnel cover.

This model used the 1290 grained Black vinyl.

Â鶹¾«Æ· Part No - AR1634