Vendor: LOTUS
Type: ELAN
Price: 26.96

During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!

We have two types of felt on offer for you to buy:

M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.听

N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.

Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.

Newton commercial part number- Felt Per Metre

Vendor: LOTUS
Type: ELAN
Price: 67.25

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听

听

NEWTON COMMERCIAL PART NUMBER- DYN11102

Vendor: LOTUS
Type: ELAN
Price: 49.95

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听

听

Newton commercial part number- DYN11101

Vendor: LOTUS
Type: ELAN
Price: 135.00

The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.听

Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.听

These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.听

听

麻豆精品 Part Number- DYN10455

Vendor: LOTUS
Type: ELAN
Price: 24.83

Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.听

Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.听

Vendor: LOTUS
Type: ELAN
Price: 7.68

This self adhesive Bitumen pad will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

These pads measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: LOTUS
Type: ELAN
Price: 40.37

These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.

Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.

Vendor: LOTUS
Type: ELAN
Price: 23.58

Brand new original specification glove box, will fit all left hand drive Lotus Elan +2 models.听 Made from painted and grained fibreboard.

Vendor: LOTUS
Type: ELAN
Price: 18.95

Lotus Elan series 4 and Sprint boot backboard, sits inside the boot and covers the rear lights

Made from painted and grained fibreboard.

Vendor: LOTUS
Type: ELAN
Price: 28.55

Made from fibreboard this is cut to shape to fit directly into the gap between the cockpit and the boot, fits Lotus Elan series 1,2,3 and 4

Vendor: LOTUS
Type: ELAN
Price: 38.07

Vinyl door panel trim cut to shape, perfect for the Lotus Elan series 1 and 2 door configurations.

Vendor: LOTUS
Type: ELAN
Price: 64.72

This piece in original style Black Perforated material has the correct distanced weld lines and on a foam backing.

麻豆精品 Part No - DP5571

Vendor: LOTUS
Type: ELAN
Price: 509.25

These seats in the Series 4 are identical in construction to the earlier models (apart from the very early Series 1) except they have perforated seat face centres rather than the plain vinyl.

Please note the picture does not show the perforated centre.

We have developed brand new foam pieces as it is impossible to fit our new covers to the old foams even if they are still there! The covers are made from the original Black stag vinyl and the seat centres have the correct weld lines as original. With each kit you will receive all internal foams sackcloth pieces for fitting under these foams as well as a set of seat covers for two seats. We also include a very complete set of pictorial fitting instructions.

麻豆精品 Part No - SC5566

Vendor: LOTUS
Type: ELAN
Price: 118.16

This kit includes the main door panel cover with the kick carpet and armrest section sewn into place.There is a separate piece of Black Perforated material that is adhered to the door itself. Full pictorial fitting instructions are included with each kit.

Vendor: LOTUS
Type: ELAN
Price: 102.51

This mat is bound all the way around in leather cloth as original. The Black Hardura is a felt backed grained PVC material. The fuel filler position is marked on the back right hand side of the mat. The binding is back tacked at this point so that when the mat is cut to fit around the fuel filler pipe the stitching will not run.

麻豆精品 Part No - CK5558

Vendor: LOTUS
Type: ELAN
Price: 118.16

This kit includes the main door panel cover with the kick carpet and armrest section sewn into place.There is a separate piece of Black Stag" material that is adhered to the door itself. Full pictorial fitting instructions are included with each kit."

Vendor: LOTUS
Type: ELAN
Price: 509.25

The very early Series 1 seats looked very similar to the later type but in fact the construction underneath the seat coversis totally different. We have developed brand new foam pieces as it is impossible to fit our new covers to the old foams even if they are still there! The covers are made from the original Black stag vinyl and the seat centres have the correct weld lines as original.With each kit you will receive all internal foams sackcloth pieces for fitting under these foams as well as a set of seat covers for two seats.We also include a very complete set of pictorial fitting instructions

麻豆精品 Part No - SC5563

Vendor: LOTUS
Type: ELAN
Price: 142.78

This door panel recovering kit is for the Series 1 later cars when the armrest and panel material are both in Black. We use the original Black Stag grain along with Atlas grey. These were the original materials that the Factory used. A new high Frequency weld tool has been created to produce the exact design on the panel material."

听

麻豆精品 Part No - AR5560

Vendor: LOTUS
Type: ELAN
Price: 64.72

This piece in original style Black Stag material has the correct distanced weld lines and on a foam backing.

Vendor: LOTUS
Type: ELAN
Price: 133.26

This tunnel top has a hardboard base the covered with Black Stag or Atlas grey vinyl as original. The simulated lines are created on our High Frequency welder and are exact. Situated in the board are the necessary mounting clips needed to attach the top to the tunnel. This colour code should fit late Series 1 7 Series 2 cars."

麻豆精品 Part No - AR5561

Vendor: LOTUS
Type: ELAN
Price: 588.00

Seat refurbishment is a skilled task and we have specialist seat trimmers who can fit all our trim to make your seats look as good as new. 麻豆精品 will collect your seats via courier (simply wrap each seat in several bin bags with a letter inside detailing your requirements). When we receive the seats our expert fitters inspect them for any damage strip clean and carry our minor repairs such as spot welding on frames or springs. We then clean the frames free of rust and paint the frames black. We re-pad/foam test all mechanisms and fit the seat covers. All seats come with 麻豆精品 warranty on parts and fitting. We box them up and return to you to simply bolt into your car.

The collection and delivery charges and seat components are priced separately please contact us for further information and for the range of seats we can refurb.

Please contact our sales team direct for an exact quote for your seat refurbishment as the price above can change for different make's and model.

Vendor: LOTUS
Type: ELAN
Price: 74.24

Vinyl and foam cut to shape, perfect for the Lotus Elan series 1 and 2 door configuration.

Vendor: LOTUS
Type: ELAN
Price: 59.64

These small hand held pump glue guns are ideal for all kinds of trimming or interior repairs, and is an essential piece of equipment for many jobs such as headlining fitting. In fact for any tasks requiring the application of contact adhesive neatly and quickly, there is nothing to beat them!听

Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means they are lightweight, comfortable to use and pretty much indestructible and our team use these on a daily basis throughout our factory. Regular flushing with solvent will keep the pump in good order, and it is听best to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.

Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and DIY centres.听This does not include the glue.

麻豆精品 Part No - CK999

Vendor: LOTUS
Type: ELAN
Price: 509.25

This set of seats were produced on all models from the late Series 1 until the Type 45 Series 4 models finished. We have developed brand new foam pieces as it is impossible to fit our new covers to the old foams even if they are still there! The covers are made from the original Black stag vinyl and the seat centres have the correct weld lines as original.

With each kit you will receive all internal foams, sackcloth pieces for fitting under these foams as well as a set of seat covers for two seats.

We also include a very complete set of pictorial fitting instructions.

This model range is for Type 36 FHC (Sept 1965-Aug 1973) & Type 45 DHC (June 1966-Aug 1973

麻豆精品 Part No - SC5560

Vendor: LOTUS
Type: ELAN
Price: 9.02

This is the top of the range, heavy duty spray glue that we use in our factory to make all our trim products on a day to day basis. We recommend you use spray glue to fit your Newton products to your car (where applicable). You will mainly use this product to fit underfelt and carpets to your floor pan. You can also use it for fitting your foams to the frames and then the seat covers to the foams. This adhesive can also be used for day to day jobs around the house. Its a full 500ml can, wrapped in bubble wrap for safe transport. Please note that we are unable to send this product outside the UK.