Vendor: MG
Type: MGF
Price:
26.96
During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!
We have two types of felt on offer for you to buy:
M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.听
N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.
Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.
Newton commercial part number- Felt Per Metre
Vendor: MG
Type: MGF
Price:
67.25
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听
听
NEWTON COMMERCIAL PART NUMBER- DYN11102
Vendor: MG
Type: MGF
Price:
49.95
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.听
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.听
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.听
听
Newton commercial part number- DYN11101
Vendor: MG
Type: MGF
Price:
135.00
The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.听
Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.听
These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.听
听
麻豆精品 Part Number- DYN10455
Vendor: MG
Type: MGF & MGTF
Price:
24.83
Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.听
Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.听
Vendor: MG
Type: MGF & MGTF
Price:
39.27
Most early cars had vinyl gear lever gaiters which have probably worn out by now. This leather gaiter comes with an original wire surround to hold it in place in the car.
麻豆精品 Part No - BHH8003
Vendor: MG
Type: MGF & MGTF
Price:
44.74
The kit contains a new hand leather gaiter in the colour options shown here. You will need to retain the white plastic sleeve which is stapled to your original gaiter as these are no longer available.
麻豆精品 Part No -听 BHH8002
Vendor: MG
Type: MGF
Price:
327.16
The beauty of our Windstop is that it is easy to fit. We have developed this unit in mild steel and then we actually cover the frame in leather - not vinyl. It is amazing what a difference this windstop makes to your summer motoring (even your Winter motoring too!) The amount of wind buffetting inside the cockpit is reduced dramatically.
麻豆精品 Part No - VT8015
Vendor: MG
Type: MGF & MGTF
Price:
1213.36
A number of the late cars were fitted with cloth seats as standard and some colours were rather dull. We can offer you our own CLASSIC design fluted centres with leather faces in a variety of colour combinations. Listed below are some of the most popular but if you can't see your colour listed below please get in touch with our sales team who will be happy to help.听
This option is for those looking for us to fit brand new covers to their existing frames. We used to have a number of existing frames for MGFs in stock as we were the only supplier during the MGFs production that provided leather seats which was a very popular upgrade. As the MGF stopped production we no longer have these frames so we will need your existing covers before we begin production. Original foams and frames will be used in this refurbishment option. For those looking to complete this work themselves or who are unable to provide the frames we do offer the seat covers only.听This price is for both seats.
Please get in touch with our sales team to arrange delivery of your frames - we can arrange collection from UK mainland addresses.
听
麻豆精品 Part No -听 S8420
Vendor: MG
Type: MGF
Price:
1065.70
A number听of the late cars were fitted with cloth seats as standard and some colours were rather dull. We can offer you our own听ICON design with leather faces in a variety of colour combinations. Listed below are some of the most popular but if you can't see your colour listed below please get in touch with our sales team who will be happy to help. As you can see from the picture a two tone option is also available.听
This option is for those looking for us to fit brand new covers to their existing frames. We used to have a number of existing frames for MGFs in stock as we were the only supplier during the MGFs production that provided leather seats which was a very popular upgrade. As the MGF stopped production we no longer have these frames so we will need your existing covers before we begin production. Original foams and frames will be used in this refurbishment option. For those looking to complete this work themselves or who are unable to provide the frames we do offer the seat covers only.听This price is for both seats.
Please get in touch with our sales team to arrange delivery of your frames - we can arrange collection from UK mainland addresses.
麻豆精品 Part No - S8410
Vendor: MG
Type: MGF
Price:
1065.70
A number听of the late cars were fitted with cloth seats as standard and some colours were rather dull. We can offer you our own CLASSIC design fluted centres with leather faces in a variety of colour combinations. Listed below are some of the most popular but if you can't see your colour listed below please get in touch with our sales team who will be happy to help.听As you can see from the picture a two tone option is also available.听
This option is for those looking for us to fit brand new covers to their existing frames. We used to have a number of existing frames for MGFs in stock as we were the only supplier during the MGFs production that provided leather seats which was a very popular upgrade. As the MGF stopped production we no longer have these frames so we will need your existing covers before we begin production. Original foams and frames will be used in this refurbishment option. For those looking to complete this work themselves or who are unable to provide the frames we do offer the seat covers only. This price is for both seats.
Please get in touch with our sales team to arrange delivery of your frames - we can arrange collection from UK mainland addresses.
麻豆精品 Part No - S8400
Vendor: MG
Type: MGF
Price:
278.09 - 292.01
(7 variants)
The original Factory moulding tools are gone! However we have developed and built our own moulding tools and can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well so we have modified certain areas to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet as well as a pair of matching overmats with a MG logo and securing clips. Fitting instructions are also included. On these models there is a 6 piece sound deadening kit under the moulded footwells.Most MGF's leak water so before ordering your new carpet may we suggest that peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. CK8011) To fit these carpets you will need to remove the seats the rear \T\" bar and cubby boxes. It is not necessary to remove any of the centre console section. Phew!! A Torx no. 50 spanner a Philips a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.Please note the overmats in this kit will be supplied in BLACK unless otherwise stated. We are no longer able to produce matching coloured over matts. An alternative option is grey but this will need to be requested upon order.
Please note picture is of听a RHD
Please note the overmats in this kit will have a heel pad on the drivers side"
麻豆精品 Part No -听 CK8016
Vendor: MG
Type: MGF
Price:
278.09 - 292.01
(7 variants)
The original Factory moulding tools are gone! However we have developed and built our own moulding tools and can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well so we have modified certain areas to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet as well as a pair of matching overmats with a MG logo and securing clips. Fitting instructions are also included. On these models there is a 6 piece sound deadening kit under the moulded footwells.Most MGF's leak water so before ordering your new carpet may we suggest that peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. CK8011) To fit these carpets you will need to remove the seats the rear \T\" bar and cubby boxes. It is not necessary to remove any of the centre console section. Phew!! A Torx no. 50 spanner a Philips a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.Please note the overmats in this kit will be supplied in BLACK unless otherwise stated. We are no longer able to produce matching coloured over matts. An alternative option is grey but this will need to be requested upon order."
麻豆精品 Part No -听 CK8015
Vendor: MG
Type: MGF
Price:
50.01
Why not replace your standard Black surround with a new Anodised cover. Will change the appearance considerably.
Fitting -听Simply undo the two self tapping screws that hold your old Black plastic surround in place, fit the new unit with the same screws and connect the wires together. Further fitting instructions included.
麻豆精品 Part No -听 BL8006
Vendor: MG
Type: MGF & MGTF
Price:
46.44
We thought that the original black plastic covers were a bit ordinary so we commissioned these beautiful Octagon covers to replace them.
Fitting -听Simply insert the blade of a knife under the black original items and pull out of door casing. The new aluminium items should be a tight push fit in the hole. If slightly loose apply a small amount of adhesive under the Octagon .
Vendor: MG
Type: MGF & MGTF
Price:
112.46
The kit contains a new hand brake grip covered in black leather and a leather gaiter in the colour options shown here. You will need to retain the white plastic sleeve which is stapled to your original gaiter as these are no longer available.
麻豆精品 Part No -听 BHH8001
Vendor: MG
Type: MGF
Price:
307.97
This 'T' bar seen here behind the headrests when fitted in conjunction with our centre console lids will dramatically change the whole appearance of the interior of your MG. If they are covered in the same leather as your seats you will have a complete matching set. As this item is on an exchange basis it is only available in the UK. When you have fitted the new 'T' bar give us a call and we will arange to pick up your old unit.Please note the Classic design of seats fitted in our car. Contrasting piping can be arranged as well.
麻豆精品 Part No -听 AR8006
Vendor: MG
Type: MGF & MGTF
Price:
59.64
These small hand held pump glue guns are ideal for all kinds of trimming or interior repairs, and is an essential piece of equipment for many jobs such as headlining fitting. In fact for any tasks requiring the application of contact adhesive neatly and quickly, there is nothing to beat them!听
Of patented Dutch manufacture, the body of the gun is enamelled brass, while the brushes are nylon with a brass and alloy threaded ferrule to attach and detach easily from the body. This means they are lightweight, comfortable to use and pretty much indestructible and our team use these on a daily basis throughout our factory. Regular flushing with solvent will keep the pump in good order, and it is听best to leave the brushes in solvent solution for prolonged storage to prevent hardening. The plastic cap supplied will keep the assembly airtight for shorter periods.
Designed to work in conjunction with any air-curing thick liquid contact adhesive such as evo-stick; available from all local hardware shops and DIY centres.听This does not include the glue.
麻豆精品 Part No -听 CK999
Vendor: MG
Type: MGF
Price:
747.26
These leather seat covers are designed to allow you to completely refurbish your Mk1 MGF seats. Two complete leather faced headrests are included in the kit, along with a pair of seat base and squab covers to your specification. As a fairly modern seat design, all of the necessary plastic retaining strips and internal trim hooks are built into the seat covers just as per the originals.
We were originally supplying these lather seat covers as an optional extra on brand new MGF cars through various Rover dealerships- that business has now passed but it does mean that we are fairly well versed in MGF interior trimming!
麻豆精品 Part No -听 SC8401
Vendor: MG
Type: MGF
Price:
747.26
These leather seat covers are designed to allow you to completely refurbish your Mk2 MGF seats. Two complete leather faced headrests are included in the kit, along with a pair of seat base and squab covers to your specification. As a fairly modern seat design, all of the necessary plastic retaining strips and internal trim hooks are built into the seat covers just as per the originals.
We were originally supplying these lather seat covers as an optional extra on brand new MGF cars through various Rover dealerships- that business has now passed but it does mean that we are fairly well versed in MGF interior trimming!
麻豆精品 Part No -听 SC8400
Vendor: MG
Type: MGF & MGTF
Price:
908.49
These leather seat covers are designed to allow you to completely refurbish your Mk2 MGF seats. Two complete leather faced headrests are included in the kit, along with a pair of seat base and squab covers to your specification. As a fairly modern seat design, all of the necessary plastic retaining strips and internal trim hooks are built into the seat covers just as per the originals.
We were originally supplying these leather seat covers as an optional extra on brand new MGF cars through various Rover dealerships- that business has now passed but it does mean that we are fairly well versed in MGF interior trimming!
麻豆精品 Part No -听 SC8420
Vendor: MG
Type: MGF & MGTF
Price:
9.02
This is the top of the range, heavy duty spray glue that we use in our factory to make all our trim products on a day to day basis. We recommend you use spray glue to fit your Newton products to your car (where applicable). You will mainly use this product to fit underfelt and carpets to your floor pan. You can also use it for fitting your foams to the frames and then the seat covers to the foams. This adhesive can also be used for day to day jobs around the house. Its a full 500ml can, wrapped in bubble wrap for safe transport. Please note that we are unable to send this product outside the UK.
Vendor: MG
Type: MGF & MGTF
Price:
187.43
All MGF & TF models had a Black cover fitted as standard. We can offer colours to match most of the Factory interior trim colours. Our covers are made to the latest Factory design.
Please see the dimensions between the eyelets on the second image to ensure this is right for your MGF or MGTF; if you have a different measurement, then please contact our sales team.
麻豆精品 Part No -听 VT8004
Vendor: MG
Type: MGF & MGTF
Price:
28.37
Some owners find that they could do with a little more headroom in their car. This kit of springs will replace the metal clips that attach the seat diaphragm to the seat frame. You will definitely feel a difference in your seating position.
Vendor: MG
Type: MGF & MGTF
Price:
80.33
Richard Newton reckons that these pockets were one of his best inventions. There is little room in these cars for sunglasses, phones or other trinkets- so these pockets could be the answer!
These ingenious pockets are easily fitted. They come with a special Velcro backing which attaches to the carpet on the door casing and the corners are held firmly in place by self tapping screws and caps.
麻豆精品 Part No - DP8004