Vendor: MINI
Type: CLUBMAN
Price:
26.96
During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!
We have two types of felt on offer for you to buy:
M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý
N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.
Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.
Newton commercial part number- Felt Per Metre
Vendor: MINI
Type: CLUBMAN
Price:
280.55
This carpet kit will fit any Mini Saloon built with the early rounder front tunnel, with the MKI floor start 'hump' (regardless of whether direct or later remote gear-change). Due to the nature of carpet we are unable to mould the Navy or Autumn Leaf carpets so these are a flat lay carpet that will need a little more patience to fit neatly around the tunnel. These are a popular option for those looking to match the brown and navy carpets used in the original Mini trim.Ìý
The kit contains the front and rear mats, a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross member covering piece. All necessary clips and fitting instructions are included along with a vinyl handbrake gaiter. The kit needs to be glued in place with the tunnel trimmed and glued into place. Due to the non moulded nature of the carpet, the tunnel has a cut out at the bulkhead which allows the carpet to fit around the shaped tunnel and bulkhead pieces and will likely need trimming to give the best possible fit. Glue is not included in this kit and we would recommendÌýyou use a couple of cans of spray contact adhesive.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality.Ìý
ÌýÂé¶¹¾«Æ· Part No –Ìý CK960
Ìý
Vendor: MINI
Type: CLUBMAN
Price:
126.00
Our Classic Mini premium flat-lay carpet set is a carefully designed replacement for when your Mini's floor is in need of a refresh! It is available in a variety of colours in our high quality tufted carpet range and the front and rear section are completed with an intricately sewn cloth binding.
This kit includes front and rear bound mats, front wheel arches, a bulkhead covering piece, a pair of sills, and a cross member covering piece. Fitting instructions are included to guide you through the fitting process.
Our Classic Mini carpet sets are manufactured in the UK with our CNC cutting machine which provides a precise shape and finish each time.
This Classic Mini carpet is available as a LHD and will fit all Saloon models from 1973 onwards where the floor pan changes to a slightly different shape. Finished with metal carpet protectors on the rear mat and a sewn heel mat on the drivers side, it will not only be a stylish addition to your Mini but is also practical with these extra features.
We highly recommend you buy an underfelt kit to compliment the fit of this carpet set.
Âé¶¹¾«Æ· Part Number- CK909
Ìý
Vendor: MINI
Type: CLUBMAN
Price:
67.25
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
NEWTON COMMERCIAL PART NUMBER- DYN11102
Vendor: MINI
Type: CLUBMAN
Price:
49.95
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
Newton commercial part number- DYN11101
Vendor: MINI
Type: CLUBMAN
Price:
135.00
The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý
Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý
These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý
Ìý
Âé¶¹¾«Æ· Part Number- DYN10455
Vendor: MINI
Type: CLUBMAN
Price:
126.00
Our Classic Mini premium flat-lay carpet set is a carefully designed replacement for when your Mini's floor is in need of a refresh! It is available in a variety of colours in our high quality tufted carpet range and the front and rear section are completed with an intricately sewn cloth binding.
This kit includes front and rear bound mats, front wheel arches, a bulkhead covering piece, a pair of sills, and a cross member covering piece. Fitting instructions are included to guide you through the fitting process.
Our Classic Mini carpet sets are manufactured in the UK with our CNC cutting machine which provides a precise shape and finish each time.
This Classic Mini carpet is available as a RHD and will fit all Saloon models from 1973 onwards where the floor pan changes to a slightly different shape. Finished with metal carpet protectors on the rear mat and a sewn heel mat on the drivers side, it will not only be a stylish addition to your Mini but is also practical with these extra features.
We highly recommend you buy an underfelt kit to compliment the fit of this carpet set.
Âé¶¹¾«Æ· Part Number- CK904 (RHD)
Ìý
Ìý
Vendor: MINI
Type: CLUBMAN
Price:
313.35
Ìý
This Classic Mini 9-piece loop pile moulded carpet set is designed to fit the 1973 onwards model of Mini which features the later style "square" front tunnel. Our loop pile Mini carpet is an alternative to our standard nylon based carvel material and is available in black, brown or grey.
The kit contains the front (moulded) and rear mats, a bulkhead covering piece, front wheel arches, a pair of sill carpets and a cross-member covering piece. All necessary clips and fitting instructions are included. Glue is not included in this kit and we would recommend you use a couple of cans of spray contact adhesive.
The kit contains underfelt for the front wheel arches and bulkhead pieces only, for the full underfelt kit you will need our part number CK900.
The sill carpets are supplied cut to size and fit with minimal trimming. The cross member carpet is supplied to be fitted right across the car, originally these only covered about 10" of the cross member working in from the sides and this piece can be cut down to size for originality. We have marked positions under the front moulded carpet to fit either early or late gear lever positions as well as steering column positions for LHD or RHD cars. It is easiest to get the best possible fit and neatest finish by removing the column from the car entirely before fitting the front mat.
NEWTON COMMERCIAL PART NUMBER- CK964
Vendor: MINI
Type: CLUBMAN
Price:
689.00
Our MKII Suffolk seats are a complete reclining seat with headrests, made with a timeless classic design. WithÌýstunningÌýcloth centres and a twin needle stitched design, the Suffolk MKII is perfect for those looking for the additionalÌýcomfort and style that our Suffolk seat provides while keeping in line with the timeless nature of the classic Mini. Complete with subframes and headrests the seats are made to order here in our Suffolk factory and are a style development of our classic Suffolk seat with all the features that make this complete seatÌýdesigned with your safety and comfort in mind.
Fitted withÌý headrests, handwheel reclining mechanism, anti tilt mechanism and seat runners with a 7" slide, these seats give you a broad range of driving positions so that you can drive your Mini in comfort and style. The seats use a moulded foam cushion for extra comfort and stability and come included with the subframe ready to fit into any model of Mini, simply take out your old seats and bolt the runners to the floorpan and you will have modern, safe and comfortable drive.Ìý
Listed are aÌýnumber of cloths, vinyls and cottons for twin needle stitching that can be used in combination to suit a wide variety of classic Mini restorationsÌýand your particularÌýtastes, however if you don't see anything that matches your needs please contact our sales team for more options or check out our swatches section.Ìý
Âé¶¹¾«Æ· Part No – S3287
Vendor: MINI
Type: CLUBMAN
Price:
689.00
Our MKII Suffolk seats are a complete reclining seat with headrests, made with a timeless classic design. WithÌýstunningÌýcloth centres and a twin needle stitched design, the Suffolk MKII is perfect for those looking for the additionalÌýcomfort and style that our Suffolk seat provides while keeping in line with the timeless nature of the classic Mini. Complete with subframes and headrests the seats are made to order here in our Suffolk factory and are a style development of our classic Suffolk seat with all the features that make this complete seatÌýdesigned with your safety and comfort in mind.
Fitted withÌý headrests, handwheel reclining mechanism, anti tilt mechanism and seat runners with a 7" slide, these seats give you a broad range of driving positions so that you can drive your Mini in comfort and style. The seats use a moulded foam cushion for extra comfort and stability and come included with the subframe ready to fit into any model of Mini, simply take out your old seats and bolt the runners to the floorpan and you will have modern, safe and comfortable drive.Ìý
Listed are aÌýnumber of cloths, vinyls and cottons for twin needle stitching that can be used in combination to suit a wide variety of classic Mini restorationsÌýand your particularÌýtastes, however if you don't see anything that matches your needs please contact our sales team for more options or check out our swatches section.Ìý
Âé¶¹¾«Æ· Part No – S3286
Vendor: MINI
Type: CLUBMAN
Price:
908.95 - 999.35
(22 variants)
Our Suffolk GT seats are based on the look and feel of a GT rally seat and are made to order here in our Suffolk factory. The Suffolk GT is based on our popular Suffolk seat, including all the the great features of the Suffolk with higher side bolsters on the bases for that extra comfort and style.Ìý
Our Suffolk seats were designed with your safety and comfort in mind. Fitted withÌý headrests, handwheel reclining mechanism, anti tilt mechanism and seat runners with a 7" slide, these seats give you a broad range of driving positions so that you can drive your Mini in comfort and style. The seats use a moulded foam cushion for extra comfort and stability and come included with the subframe ready to fit into any model of Mini, simply take out your old seats and simply bolt the runners to the floorpan and you will have modern, safe and comfortable drive.Ìý
You can custom choose you colour range from our vast vinyl colour range including both matching and contrasting piping colours. If your preferred colour scheme is not here, simply call or email the sales team.ÌýFor any two tone Suffolk GT seats our Suffolk GT seat order form must be downloaded and completed and emailed when your order is placed. Alternatively our sales team will be more than happy to help. PleaseÌý
Âé¶¹¾«Æ· Part No – S3289
Vendor: MINI
Type: CLUBMAN
Price:
908.95 - 999.35
(22 variants)
Our Suffolk GT seats are based on the look and feel of a GT rally seat and are made to order here in our Suffolk factory. The Suffolk GT is based on our popular Suffolk seat, including all the the great features of the Suffolk with higher side bolsters on the bases for that extra comfort and style.Ìý
Our Suffolk seats were designed with your safety and comfort in mind. Fitted withÌý headrests, handwheel reclining mechanism, anti tilt mechanism and seat runners with a 7" slide, these seats give you a broad range of driving positions so that you can drive your Mini in comfort and style. The seats use a moulded foam cushion for extra comfort and stability and come included with the subframe ready to fit into any model of Mini, simply take out your old seats and simply bolt the runners to the floorpan and you will have modern, safe and comfortable drive.Ìý
You can custom choose you colour range from our vast vinyl colour range including both matching and contrasting piping colours. If your preferred colour scheme is not here, simply call or email the sales team.ÌýFor any two tone Suffolk GT seats our Suffolk GT seat order form must be downloaded and completed and emailed when your order is placed. Alternatively our sales team will be more than happy to help. PleaseÌý
Âé¶¹¾«Æ· Part No – S3288
Vendor: MINI
Type: CLUBMAN
Price:
720.80
The complete rear seat assembly seen here has been developed to match the appearance of our Bucket & Suffolk reclining front seats. These are supplied as a complete unit with brand new frame and foams ready to fit straight into your car.Ìý Available in a range of colour schemes to match the design of your front seats - please enquire with our sales team for colour combinations available.Ìý
Âé¶¹¾«Æ· Part No – S3298
Vendor: MINI
Type: CLUBMAN
Price:
614.80
The complete rear seat assembly seen here has been developed to match the appearance of our Bucket & Suffolk reclining front seats. These are supplied as a complete unit with brand new frame and foams ready to fit straight into your car.Ìý Available in a range of colour schemes to match the design of your front seats - please enquire with our sales team for colour combinations available.Ìý
Âé¶¹¾«Æ· Part No – S3297
Vendor: MINI
Type: CLUBMAN
Price:
147.35
We have had the wire squab frames remanufactured for the Mini Saloon which we use on our complete rear seat assembly for our Suffolk and Bucket seats for some time but these are now available to purchase separately for those that have either damaged or misplaced their original frames.Ìý
The frame began to be used in the Austin Minis of the 1960s and carried all the way through the Mini's production. This frame is suitable for vehicles after 1970Ìýthat used two small tabs at the bottom of the squab frame. Cars after 1996 used a different shaped frame as the seat belt location changed.
The frame can combined with new rear seat covers, foams and our seat fitting service from our experienced in house fitting team for seats to be delivered to you as a complete unit ready to fit into the vehicle.Ìý Ìý
Vendor: MINI
Type: CLUBMAN
Price:
5.05
These hog rings are used by our seat fitters to fit the rear seat covers to the frames on a number of seat refurbishments as per the original fitting. These hog rings are easiest to fit with a pair of hog ring pliers
Vendor: MINI
Type: CLUBMAN
Price:
996.77 - 1103.46
(6 variants)
To celebrate 55 years of the Mini, and 50 years since the famous rally win, we designed our ‘Monte Carlo’ range of seat covers. These covers offer the two tone design of the famous MKI Cooper design for the laterÌýspecification Minis. These are perfect for people looking to emulate the classic style of the MKI Mini Cooper and are fantastic replacements for the number of limited edition interiors that were available in the 1970's & 80's that we are unable to replicate and are available in the range of colours used on the MKI Coopers including the popular Brocade materials.Ìý
This front and rear seat covering kit is designed to fit the original foams used in the later Minis and this kit comes with the foams for the front seats. Rear seat foamsÌýand diaphragms are available to replace those that have become a little tired. These seats are suitable for Minis withÌýreclining front seatsÌýwith headrests. Full fitting instructions are included.Ìý
Âé¶¹¾«Æ· Part No – SC3050
Vendor: MINI
Type: CLUBMAN
Price:
928.63 - 1044.51
(6 variants)
To celebrate 55 years of the Mini, and 50 years since the famous rally win, we designed our ‘Monte Carlo’ range of seat covers. These covers offer the two tone design of the famous MKI Cooper design for the laterÌýspecification Minis. These are perfect for people looking to emulate the classic style of the MKI Mini Cooper and are fantastic replacements for the number of limited edition interiors that were available in the 1970's & 80's that we are unable to replicate and are available in the range of colours used on the MKI Coopers including the popular Brocade materials.Ìý
This front and rear seat covering kit is designed to fit the original foams used in the later Minis and this kit comes with the foams for the front seats. Rear seat foamsÌýand diaphragms are available to replace those that have become a little tired. These seats are suitable for Minis withÌýreclining front seatsÌýwith no headrest. Full fitting instructions are included. Please note picture shows headrests cover which are not included within this kit - for cars with headrests fitted please see our part number SC3050
Âé¶¹¾«Æ· Part No – SC3040
Vendor: MINI
Type: CLUBMAN
Price:
24.83
Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý
Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý
Vendor: MINI
Type: CLUBMAN
Price:
8.02
These foams are best glued to the wheel arch panel first and then the wheel arch cover is glued over the top. These foams soften the profile of the bare metal underneath the wheel arch cover.
This kit covers both wheel arches.
Vendor: MINI
Type: CLUBMAN
Price:
24.49
Vendor: MINI
Type: CLUBMAN
Price:
7.53
Pack of 4 plastic plates which protect your carpet from the bottom of your seat frame. The pack of 4 includes 2 flat plates and another 2 plates with a curve which in design mimics the shape to ride up onto the tunnel. Also included are 16 split rivets.
Vendor: MINI
Type: CLUBMAN
Price:
447.00
This plaid cloth design was typical of 1970's & 80's Minis and was originally used on both the Clubman Saloon (normally the Mini 1100 Special and Mini HL models) & Estate models from 1973 onwards. A number of the original cloths used in this period are no longer available but as this design was fairly popular excitinglyÌýwe have had both the Golden Tan and the Blue plaid materials remanufactured. This material was also used in TR7 production.Ìý
This is a seat kit for both front seats.
Âé¶¹¾«Æ· Part No – SC3317
Vendor: MINI
Type: CLUBMAN
Price:
447.00
This rear seat is suitable for both the early and late style of Clubman seats and features the distinctive high frequency welded pattern that was introduced in this period. Please note pictured is the Saloon version of the seat but the weld pattern was the same.Ìý
Âé¶¹¾«Æ· Part No - SC3246
Vendor: MINI
Type: CLUBMAN
Price:
274.27
We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaint the seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.
Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange. This cost is per seat.