Vendor: MINI
Type: MINI VAN PICKUP
Price: 26.96

During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!

We have two types of felt on offer for you to buy:

M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý

N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.

Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.

Newton commercial part number- Felt Per Metre

Vendor: MINI
Type: MINI VAN PICKUP
Price: 67.25

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

NEWTON COMMERCIAL PART NUMBER- DYN11102

Vendor: MINI
Type: MINI VAN PICKUP
Price: 49.95

Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!

This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý

Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý

This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý

Ìý

Newton commercial part number- DYN11101

Vendor: MINI
Type: MINI VAN PICKUP
Price: 135.00

The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý

Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý

These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý

Ìý

Â鶹¾«Æ· Part Number- DYN10455

Vendor: MINI
Type: MINI VAN PICKUP
Price: 24.83

Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý

Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý

Vendor: MINI
Type: MINI VAN PICKUP
Price: 24.49

Vendor: MINI
Type: MINI VAN PICKUP
Price: 7.53

Pack of 4 plastic plates which protect your carpet from the bottom of your seat frame. The pack of 4 includes 2 flat plates and another 2 plates with a curve which in design mimics the shape to ride up onto the tunnel. Also included are 16 split rivets.

Vendor: MINI
Type: MINI VAN PICKUP
Price: 274.27

We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaint the seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.

Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange.ÌýThis cost is per seat.

Vendor: MINI
Type: MINI VAN PICKUP
Price: 247.53

Why not take the stress out of headlining fitting and get our fitting team to do this for you? This is only for headlinings that are fitted to a metal frame that can be removed from the car as unfortunately we do not have space to have a vehicle within the factory (even a Mini!) This is suitable for both MKI & II Minis and Van & Pickup headlinings. Frames can either be dropped into our factory or we can arrange collection to UK addresses at an additional cost.Ìý

Please note this cost does not include the headlining material or the frame. Original headlining frames are at a premium, if yours is damaged or lost please ask our sales team if we have any available - please note we have very limited stock of these frames.Ìý

Vendor: MINI
Type: MINI VAN PICKUP
Price: 235.20

This kit replaces the standard painted and grained fibreboard panels that were originally fitted to all commercial vehicles and adds a touch of luxury to these normally quite sparse vehicles.ÌýPurchasing as a complete trim kit offers a saving to purchasing the parts individually. It includes the following components:

Pair of oval speedo panels
Padded dash tray liner
Pair of door panels
Front pocket liners
Door check straps

Listed below are a number of popular colour options, if you can't see your colour scheme listed please get in touch with our sales team who will be happy to help.Ìý

Â鶹¾«Æ· Part No – TK3051

Vendor: MINI
Type: MINI VAN PICKUP
Price: 262.30

This kit replaces the standard painted and grained fibreboard panels that were originally fitted to all commercial vehicles and adds a touch of luxury to these normally quite sparse vehicles.ÌýPurchasing as a complete trim kit offers a saving to purchasing the parts individually. It includes the following components:

Pair of round speedo panels
Padded dash tray liner
Pair of door panels
Front pocket liners
Door check straps
Two pairs of door fillet panels

Listed below are a number of popular colour options, if you can't see your colour scheme listed please get in touch with our sales team who will be happy to help.Ìý

Ìý

Â鶹¾«Æ· Part No – TK3049

Vendor: MINI
Type: MINI VAN PICKUP
Price: 111.04

This style of cover was unique to the commercial vehicles and used a simulated stitch weld design. Unlike the MKI Saloons the flute widths did not change between the stitched and welded versions and the only difference can be seen when looking closely at the flute lines.ÌýThis is for one base cover only.Ìý

Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed

ÌýÂ鶹¾«Æ· Part No - SC3016

Vendor: MINI
Type: MINI VAN PICKUP
Price: 126.65

The MKI Mini used a variety of trim designs before design and production methods became standardised. Flutes in this model are created through stitching whereas later models used the welded faces on the seats with a narrower flute design as production became more automated.Ìý

We would suggest that you strip one seat first to see exactly how it is fitted then assemble the diaphragms and foams and then fit the covers in a dry run before final fitment, leaving one seat complete for reference purposes. If you would prefer the seats to be fitted by a professional then our seat fitting service is for you.

This is for one squab cover only.Ìý

Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed

ÌýÂ鶹¾«Æ· Part No - SC3007

Vendor: MINI
Type: MINI VAN PICKUP
Price: 111.04

The MKI Mini used a variety of trim designs before design and production methods became standardised.ÌýThe stitched flutes on the cover run all the way to the front of the skirt as pictured here. This design was also used throughout production on the Mini Vans and Pickups.

We would suggest that you strip one seat first to see exactly how it is fitted then assemble the diaphragms and foams and then fit the covers in a dry run before final fitment, leaving one seat complete for reference purposes. If you would prefer the seats to be fitted by a professional then our seat fitting service is for you.

This is for one base cover only.Ìý

Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed

ÌýÂ鶹¾«Æ· Part No - SC3004

Vendor: MINI
Type: MINI VAN PICKUP
Price: 126.65

This style of cover was unique to the commercial vehicles and used a simulated stitch weld design. Unlike the MKI Saloons the flute widths did not change between the stitched and welded versions and the only difference can be seen when looking closely at the flute lines. This is for one squab cover only.Ìý

Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed

ÌýÂ鶹¾«Æ· Part No - SC3013

Vendor: MINI
Type: MINI VAN PICKUP
Price: 49.48

We have retooled this item to the original specification. This cover is made from painted and grained black fibreboard and is exactly shaped to the original. We also include the two rubber straps with metal attachment clips. One end attaches to the box itself and the other end to the original brackets on the floor pan.

Vendor: MINI
Type: MINI VAN PICKUP
Price: 90.74

Mini Pickups had a one piece headlining frame with the canopy glued and stapled to it. Originally Cream Crackle was used on the early models and the light grey was used during the 1970's, however we have seen a range of colours available below. The frames are no longer available so make sure you keep the safe during restoration. Please note contrary to popular the belief the frames for the Mini Van and Pickup are different and will not fit the other vehicle

If you require a headlining for a Mini Van, check out our part number HL3018Ìý

Â鶹¾«Æ· Part No – HL3024

Vendor: MINI
Type: MINI VAN PICKUP
Price: 97.22

Mini Vans had a one piece headlining frame with the canopy glued and stapled to it. Originally Cream Crackle was used on the early models and the light grey was used during the 1970's, however we have seen a range of colours available below. The frames are no longer available so make sure you keep the safe during restoration. Please note contrary to popular the belief the frames for the Mini Van and Pickup are different and will not fit the other vehicle

If you require a headlining for a Mini Pickup, check out our part number HL3024Ìý

Â鶹¾«Æ· Part No – HL3018

Vendor: MINI
Type: MINI VAN PICKUP
Price: 16.96

The majority of all Minis had painted "A" post pillars in all sorts of colours. We have developed a kit that fits exactly in this space with a fibreboard panel covered in black leathercloth material with double sided tape on the reverse side. This piece is adhered to the "A" post and a flap on the outer side is held in place by the draught excluder on the door post. These come as a pair.Ìý

Â鶹¾«Æ· Part No - DT3080

Vendor: MINI
Type: MINI VAN PICKUP
Price: 40.62

Originally Mini Van & Pickups were fitted with an uncovered speedo panel. These are suitable for all models using the round single instrument speedo binnacle.Ìý Available in black only, these can easily be primed and painted in a variety of colours to match the wide range of utility vehicles available.

While originally all Mini Vans & Pickups were fitted with non vinyl covered interior panels, these are easily transferable to our vinyl covered trim for those looking to upgrade their interior.

Vendor: MINI
Type: MINI VAN PICKUP
Price: 52.99

Originally Mini Van & Pickups were fitted with an uncovered door panel. Available in black only, these can easily be primed and painted in a variety of colours to match the wide range of utility vehicles available.

While originally all Mini Vans & Pickups were fitted with non vinyl covered interior panels, these are easily transferable to our vinyl covered trim for those looking to upgrade their interior.

Ìý

Vendor: MINI
Type: MINI VAN PICKUP
Price: 84.53 - 177.50 (17 variants)

These panels are as originally fitted to all UK built MKI and MKII Mini Saloons, Coopers and Travellers. These are also suitable for the Mini Van & Pickup although these were originally fitted for an uncovered painted board. We create the 8 horizontal line design with a high frequency welding machine and our own dedicated tooling as they were created originally.Ìý

We offer a range of original colours including the early style Fleck trimmed panels and the Gold & Silver Brocade panels which were used on a number of the MKI Coopers.

These panels will look their best fitted alongside new fillet panels (part number DP3022)

ÌýÂ鶹¾«Æ· Part No – DP3021

Vendor: MINI
Type: MINI VAN PICKUP
Price: 12.62

We cut these boards fromÌýhigh quality painted and grained automotive quality fibreboard. We supply these as in a black finish as standard but these can easily be painted once received in a variety of colours. These are fitted in conjunction with the fillet panels and front door panels and once positioned correctly are held in place by two self tapping screws (not included)Ìý

If you would like the panels vinyl covered to match the other trim panels please enquire with our sales team who will be happy to help.Ìý

Vendor: MINI
Type: MINI VAN PICKUP
Price: 12.62

We cut these boards fromÌýhigh quality painted and grained automotive quality fibreboard. We supply these as in a black finish as standard but these can easily be painted once received in a variety of colours. These are fitted in conjunction with the fillet panels and front door panels and once positioned correctly are held in place by two self tapping screws (not included)Ìý

If you would like the panels vinyl covered to match the other trim panels please enquire with our sales team who will be happy to help.

Vendor: MINI
Type: MINI VAN PICKUP
Price: 22.85

These panels hold the interior door panel in place against the external door skin by bearing against the internal door frame. A pair of fillet panels will fit one door, one at the front of the pocket and one at the rear, so two pairs will be needed for a complete car set. While available in black only, these can easily be primed and painted in a variety of colours to match the wide range of utility vehicles available.

We recommend that these are fitted in conjunction with new matching door panels wherever possible, as the original items are very easy to damage upon removal from the doors.

While originally all Mini Vans & Pickups were fitted with non vinyl covered interior panels, these are easily transferable to our vinyl covered trim for those looking to upgrade their interior.

Ìý