Vendor: TRIUMPH
Type: SPITFIRE
Price:
26.96
During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!
We have two types of felt on offer for you to buy:
M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý
N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.
Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.
Newton commercial part number- Felt Per Metre
Vendor: TRIUMPH
Type: SPITFIRE
Price:
86.94
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
NEWTON COMMERCIAL PART NUMBER- DYN11102
Vendor: TRIUMPH
Type: SPITFIRE
Price:
60.48
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
Newton commercial part number- DYN11101
Vendor: TRIUMPH
Type: SPITFIRE
Price:
167.58
The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý
Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý
These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý
Ìý
Âé¶¹¾«Æ· Part Number- DYN10455
Vendor: TRIUMPH
Type: SPITFIRE
Price:
24.83
Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý
Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý
Vendor: TRIUMPH
Type: SPITFIRE
Price:
205.30
We offer a seat fitting service for those who would prefer their seats to turn up ready to fit directly into the car. Our professional seat fitters will strip down your original seat, removing your old worn seat covers, foams and diaphragms, sandblast andÌýrepaint the seat frame and fit with brand new covers. Please note this cost only covers the labour charge for us to complete this and covers, foams and diaphragms will all need to be purchased separately. Small cosmetic welding can be completed but anything structural will need to repaired before we refurbish the seats.
Seats can be delivered directly into our Suffolk factory or we can arrange collection from most UK addresses. Please get in touch with our sales team if this is something you would like to arrange. This cost is per seat.
Vendor: TRIUMPH
Type: SPITFIRE
Price:
393.96
This 9 piece trim panel kit will replace all the original interior panels in your car. The kit consists of a pair door panels and 44 panel clips a pair of rear wheel arch panels four pieces of loose material to cover the rear wheel arches as well as the B post liners. A set of screws and cup washers are also included to fix the rear arch panels.
Âé¶¹¾«Æ· Part No – LTK1580
Vendor: TRIUMPH
Type: SPITFIRE
Price:
393.96
This 9 piece trim panel kit will replace all the original interior panels in your car. The kit consists of a pair door panels and 44 panel clips a pair of rear wheel arch panels four pieces of loose material to cover the rear wheel arches as well as the B post liners. A set of screws and cup washers are also included to fix the rear arch panels.
Âé¶¹¾«Æ· Part No – LTK1576
Vendor: TRIUMPH
Type: SPITFIRE
Price:
393.96
This 9 piece trim panel kit will replace all the original interior panels in your car.The kit consists of a pair door panels and 44 panel clips a pair of rear wheel arch panels four pieces of loose material to cover the rear wheel arches as well as the \B\" post liners. A set of screws and cupwashers are also included to fix the rear arch panels. If you are ordering a Black set may we suggest that you check the old panels and seat covers to see if the grain of the material is quite smooth or they have a rough grain. During this period Triumph offered both these diferent grained vinyls.The other colours available have the original Factory grain on the vinyl."
Vendor: TRIUMPH
Type: SPITFIRE
Price:
393.96
This 9 piece trim panel kit will replace all the original interior panels in your car. The kit consists of a pair door panels and 44 panel clips a pair of rear wheel arch panels four pieces of loose material to cover the rear wheel arches as well as the B post liners. A set of screws and cup washers are also included to fix the rear arch panels.
Âé¶¹¾«Æ· Part No – LTK1570 / LTK1571 / LTK1572 / LTK1573 / LTK1574 / LTK1575
Vendor: TRIUMPH
Type: SPITFIRE
Price:
86.74
If your centre console metal is in good order, you may just need a new vinyl recovering kit.
The Mk.IV models (1973-76) had a variety of colours as described here. The vinyl had the courser 1290 grain pattern.
The 1500 cars would have had a smoother grained vinyl in Black known asÌý Stag grain. Please take care when ordering Black.Ìý
ÌýOur kit includes a ready sewn vinyl cover and a new handbrake brake gaiter.Ìý
Âé¶¹¾«Æ· Part No - AR1688 / AR1690 / AR1691 / AR1692 / AR1693 / AR1695
Vendor: TRIUMPH
Type: SPITFIRE
Price:
144.54
This particular rear wheel arch panel kit fits only the Mk.1 & 2 models. The cut out in the panel is for the hood mechanism. The kit contains the two arch panels and two large pieces of matching vinyl to cover the wheel arches and a further two smaller pieces to cover the "B" posts.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No – WA1590
Vendor: TRIUMPH
Type: SPITFIRE
Price:
144.54
The kit includes die cut hardboard panels with the correct rubber sealer which is stapled to the panel two small pieces of matching vinyl to cover the "B" post pillar, two larger pieces to cover the rounded wheel arch itself. Also included is a packet of screws and cupwashers to fix the panel to the bodywork.
Âé¶¹¾«Æ· Part No – WA1584 / WA1586/ WA1587/ WA1588/ WA1589
Vendor: TRIUMPH
Type: SPITFIRE
Price:
144.54
ÌýThis wheel arch panel kit fits all cars from 1967-73 and 1976-80 models. Obviously various colours are available to suit the different marques as listed here. The kit includes die cut hardboard panels with the correct rubber sealer which is stapled to the panel two small pieces of matching vinyl to cover the "B" post pillar two larger pieces to cover the rounded wheel arch itself. Also included is a packet of screws and cup washers to fix the panel to the bodywork.
Original colours for MK.3 cars were- Black, Matador Red, Midnight Blue, Light Tan, New Tan and Shadow Blue.
Original colours for MK.IV cars were:- Black, Matador Red, New Tan and Shadow Blue.
1976-80 models were originally only made with Black or Beige interiors.
We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No – WA1583 / WA1585 / WA1586/ WA1588
Vendor: TRIUMPH
Type: SPITFIRE
Price:
41.04
This is a replacement headrest cover. The bottom of your headrest has a plastic plate which can be unscrewed which will then show staples which hold the cover in place. Remove the cover. Turn your new cover inside out and slowly slide it over the foam turning it the right way. Check before stapling that the foam fills the cover completely-old age of the foam may have caused it to have shrunk in size slightly.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - THC1529 / THC1532
Vendor: TRIUMPH
Type: SPITFIRE
Price:
49.27
Rubber seat straps that are now over thirty years old probably need changing as they have perished. Our kit includes the correctly sized lengh of strap - however please note that the two hook clips are now no longer available as pictured above and have been replaced with a single hook.
Vendor: TRIUMPH
Type: SPITFIRE
Price:
109.81
Triumph seat foams were always well engineered. This particular foam is made up of several different foam specifications-the side bolsters are in relatively hard foam, the back panel that glues to the seat frame is chipfoam and the front centre section is of a softer design for comfort.
Vendor: TRIUMPH
Type: SPITFIRE
Price:
109.81
Triumph seat foams were always well engineered. This particular foam is made up of several different foam specifications-the side bolsters are in relatively hard foam, the back panel that glues to the seat frame is chipfoam and the front centre section is of a softer design for comfort.
Vendor: TRIUMPH
Type: SPITFIRE
Price:
559.01
A new design of seat was introduced for the 1970 model year. It was based on the UK seats but with the addition of a fixed high back style headrest. The seat reclines. The new design incorporated vertical flutes in the seat centres. This particular design has plain flutes. This is a pair of seat covers.
Âé¶¹¾«Æ· Part No – SC1526
Vendor: TRIUMPH
Type: SPITFIRE
Price:
361.48
Cars built in this period normally had Houndstooth cloth centred seats as fitted by the Factory. Many customers over the years have asked for vinyl covers to replace the Houndstooth. We are therefore offering the earlier MK.IV design with the fluted centres to fit your seats.Please note that headrest covers or complete headrests are available separately. May we also suggest you inspect your seat foams as they may well be in need of replacing.
Âé¶¹¾«Æ· Part No - SC1519 / SC1520
Vendor: TRIUMPH
Type: SPITFIRE
Price:
361.48
1973 cars had a new design of seat which not only reclined but had headrests fitted for the first time on Spitfire models. The vinyl material was also changed from previous models to a courser grain known in the Trade as "1290" grain. Our seat covers are made to the exact design as the originals and come with pictorial fitting instructions.Please note that this kit is for both front seats. Please note that headrest covers or complete headrests are available separately. If you are replacing original Factory seat covers may we suggest you check the condition of your original seat foams. New replacement foams are available.
We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - SC1511 / SC1512 / SC1513 / SC1514 / SC1515
Vendor: TRIUMPH
Type: SPITFIRE
Price:
97.87
The headlining material we use is actually called "Longhorn" design because of the very heavy graining in the material. This material was originally used by the factory. All necessary sewn hoops are stitched in place to accept the roof stays.
Âé¶¹¾«Æ· Part No - HL1640
Vendor: TRIUMPH
Type: SPITFIRE
Price:
130.45
The headlining material we use is actually called "Longhorn" design because of the very heavy graining in the material. This material was originally used by the factory. All necessary sewn hoops are stitched in place to accept the roof stays. We are offering these kits in Black or White as well.
Âé¶¹¾«Æ· Part No - HL1639
Vendor: TRIUMPH
Type: SPITFIRE
Price:
88.49
This panel is made of Bitumen board which is waterproof. The board is stamped out on our 60 Ton press and the two sides have black metal strenghening strips applied. Each board comes with four metal brackets to attach it to the vehicle. Small nuts and bolts are not supplied.
Âé¶¹¾«Æ· Part No – EV1642
Vendor: TRIUMPH
Type: SPITFIRE
Price:
144.98
Our door panels are exact replicas of the Factory originals. The material on this model had a courser grained vinyl finish than earlier models.(Known as \1290\" grain in the Trade) The panels are die cut on our 60 ton presses and have all the correct holes and apertures for the perfect fit. The carpet kick panels are firstly sewn to a vinyl surround which in turn are welded to the face panel on our High Frequency welding machine."
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - DP1576 / DP1580 / DP1581 / DP1582