Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
81.93
Over the many years since the Series II model of the Morris Minor was first manufactured, your seats will gradually lose their bounce and comfort which is why this front seat padding kit is the perfect solution.
Including both base and squab foams and foam wraps, this front seat kit will restore the luxurious feel to your Series II seats that they once had.Ìý
This set includes all the foams that you need to restore one of your Morris Minor front seats and the kit is only suitable for Series II front seats.
Newton commercial part number - SF667
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
26.96
During the fitting process of your new interior you may find that you want to add some more sound deadening in some places where we don't provide a set. Buying the felt we use for our underfelt kits off the roll allows you to trim the material into any shape no matter how odd to be fitted into your classic car!
We have two types of felt on offer for you to buy:
M6 felt- this is made from recycled clothes and textiles. This felt is 5mm thick.Ìý
N20 felt- this is flame retardant and is also made from recycled clothes and textiles. This felt is 10mm thick.
Our rolls of felt are approximately 1.4 metres wide and the quantity is per metre in length.
Newton commercial part number- Felt Per Metre
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
67.25
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
NEWTON COMMERCIAL PART NUMBER- DYN11102
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
49.95
Dynaliner acts as a very lightweight temperature and sound insulation option that can be used on the roof, floors, doors, bonnet and anywhere else in your car you can reach!
This is a 3mm thick material and is available in a sheet that is 81cm x 137cm ready for you to trim to the right shape uniquely to your car.Ìý
Dynaliner has an acrylic peel and stick self adhesive back so you can remove this and stick it straight onto the metal work of your car to limit the noise and vibrations.Ìý
This sound deadening meets both UL and FMVSS flame resistance requirements as well as being oil and water resistant making it a great, durable option for your car.Ìý
Ìý
Newton commercial part number- DYN11101
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
135.00
The Dynamat Xtreme Bulk Pack is a black, lightweight, sound-deadening material that can be used on its own or in conjunction with our various underfelt kits.Ìý
Each pack includes nine sheets with each one measuring 18" x 32" and is 1.7mm thick.Ìý
These sound-deadening sheets are easy to use with their peel-back self-adhesive backing so you can take off the protective layer and shape them straight onto the contours of the metalwork of your classic car in the bulkhead, doors, floors, and more to create a stronger sound barrier.Ìý
Ìý
Âé¶¹¾«Æ· Part Number- DYN10455
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
14.00
Unlike our standard door pulls the Minor Van & Pickup door pulls are not fitted with the original plate fixing. This piece of leather is fitted through the hole pre cut in the Van & Pickup door panels and those looking to fit this way will need to retain original fixings. These are sold individually.Ìý
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
2.19
These C-Clips are used on non reclining seats to secure the squab covers in place around the seat frame during fitting.Ìý
This pair of clips is enough for one seat
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
1225.01
This kit includes pretty much everything you might need for a complete interior retrim of your Morris Minor Van and as an added bonus provides a saving on purchasing these parts individually.Ìý
This kit includes everything listed below:
Vinyl front seat covers (one fixed/ one folding included within kit - please advise if your requirements differ from this)Ìý
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - TK678
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
24.83
Made from a recyclable material, these eco neutral sound deadening pads are the perfect solution for the eco conscious classic car owner. Developed specifically for their airborne sound deadening properties, these insulation pads can be used throughout restorations and are ideal for sound deadening throughout the car, from the floor pan to the doors. Flexible in nature, they fit well into the most difficult to reach spaces and have a high quality self adhesive backing.Ìý
Each sound deadening pad is 300mm x 200mm and are approximately 2.5mm thick (please note this does vary slight across the product from 2-3mm) and are sold as a convenient pack of 4.Ìý
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
97.91
This particular seat design was only used on the Vans and Pickups. On the face of the seat there are two simulated stitch lines but they are created on our high frequency welding machine.Please note this cover will fit folding seats only. See SC740 for fixed.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - SC742
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
97.91
This particular seat design was only used on the Vans and Pickups. On the face of the seat there are two simulated stitch lines but they are created on our high frequency welding machine.Fitting the seat covers seat straps and foam/fibre paddings will be same throughout this period. Basically the Pirelli straps hook onto the frame the squab padding kit and base foam pad are glued to the frame. The seat covers once fitted are held to the frame with metal clips. We would suggest that you strip one seat first to see exactly how it is fitted then assemble the straps and foams etc and the fit the covers in a \dry\" run before final fitment.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - SC741
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
97.91
This particular seat design was only used on the Vans and Pickups. On the face of the seat there are two simulated stitch lines but they are created on our high frequency welding machine.Please note this cover will fit fixed seats only. See SC742 for folding.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - SC740
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
40.37
These self adhesive Bitumen pads will help reduce noise levels. These pads were put into the original cars in the 1960's and we have been able to get hold of this material to provide a cheap and easy way to reduce vibrations within the car.
Each pad measure 30cm x 19cm (12" x 7.5") each and are manufactured from Bitumen with added mineral fillers and synthetic rubber to form a highly vicoelastic material. Due to the nature of the material these can be quite brittle when cold and may be cracked upon receipt, however as these are warmed they become very flexible and can be moulded into place within the car.
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
88.64
This is a headlining for a minor van and pick up and will fit all van's and pick up models up to the year of 1968. All models that use the hardboard fitting method should purchase this item all headlinings which use the piano" wires should use part number HL730. Available in grey, white, and fleck.
Âé¶¹¾«Æ· Part No - HL729
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
150.38 - 157.91
(7 variants)
Originally all BMC carpets were made from a carpet material known as Carvel which was a short pile carpet with heavy woven backing. This wasÌýsupersededÌýin theÌýmid-1960's by what was then a modern carpet where the pile was flocked to a rubber composite backing and made by Dunlop. These materials are no longer available so many years ago we had manufactured a carpet material which looks very much like the original Carvel style. Recently we decided to make our carpets more attractive by actually moulding the gearbox and handbrake tunnel carpets so that they fit these tunnel areas properly.ÌýThe kit contains 4 footwell carpetsÌýsillÌýcarpets tunnel pieces. Carpet clips and floor studs are also included with a set of pictorial fitting instructions.
Âé¶¹¾«Æ· Part No - CK748
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
150.38 - 157.91
(7 variants)
Originally all BMC carpets were made from a carpet material known as Carvel which was a short pile carpet with heavy woven backing. This was superseded in the mid-1960's by what was then a modern carpet where the pile was flocked to a rubber composite backing and made by Dunlop. These materials are no longer available so many years ago we had manufactured a carpet material which looks very much like the original Carvel style. Recently we decided to make our carpets more attractive by actually moulding the gearbox and handbrake tunnel carpets so that they fit these tunnel areas properly. The kit contains 4 footwell carpets sill carpets tunnel pieces. Carpet clips and floor studs are also included with a set of pictorial fitting instructions.
Âé¶¹¾«Æ· Part No - CK741
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
49.44
You will note from the photograph that on the outer side of this box there is a "recessed" area. The reason that this recess or cut out area is there, is because on the Series Two models the wiper motor was situated inside the dash area and interefered with the glove box if not modified in this way. Amazingly, this design was not altered until 1962 even though the wiper motor position was altered many years previously.
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
49.44
You will note from the photograph that on the outer side of this box there is a "recessed" area. The reason that this recess or cut out area is there, is because on the Series Two models the wiper motor was situated inside the dash area and interefered with the glove box if not modified in this way. Amazingly, this design was not altered until 1962 even though the wiper motor position was altered many years previously.
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
11.66
These are essential to fit the door panels. Sufficent for two door panels.
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
4.70
You will require 4 of these clips per glove box to secure it to the bodywork.They are supplied in a packet of eight.
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
35.34
These panels fit between the parcel tray and in front of the front wheel arches. They will match the colour of all other panels in the car.
Please note that colours listed are those that were used in the original manufacture of the vehicle. We do, however, have a number of other colours which are available to order – please check out our colour swatches section at the bottom of the page to see the wide range of other colours available or get in touch with our sales team who will be happy to send samples. If you would like to order a colour that is not listed please contact our sales team who can advise the best way to proceed.
Âé¶¹¾«Æ· Part No - FL692
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
37.52
Base foam cushions do get worn out over a period of years. This together with the seat Pirelli straps do need changing the older they get.
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
8.36
You will need these clips to secure the draught excluder to the door frame. If you still have your original clips-keep them-as the more clips you have the better!
Vendor: MORRIS MINOR
Type: MINOR ALL MODELS + VAN
Price:
83.95
We supply two lengths of excluder which will fit either the front or rear doors. Retain your original clips if possible and purchase a set of new ones too (DE736). The more clips you have the better. This kit will be enough to fit two doors.
Âé¶¹¾«Æ· Part No - DE733
Vendor: MORRIS MINOR
Type: MORRIS VAN PICKUP
Price:
88.64
This headlining is sewn ready to accept the cross member rail and also the "piano" wires that secure it to the side rails. An extra piece of material is included for covering the piece of wood at the rear.
Âé¶¹¾«Æ· Part No - HL730